Like any other sport / hobby it is interesting. For those who haven’t discovered the hobby, here’s some information. A model engine is a copy of an existing or imaginary aircraft on a small unmanned aircraft or on a scale model. Model engines are divided into two basic groups: flight and not flight. Non-flying models are also called static, display, or shelf models.
The question is, is the aircraft using a hobby model? As described above, this hobby can be practiced in two ways: assembling static models of aircraft and handling dynamic models of aircraft with restrictive flight capabilities. Nowadays, when it comes to aircraft models, different models are made from different models that allow the right level of assembly. Aircraft models are made of simple cards or polystyrene foam dispersers, such as balsa wood, bamboo, plastic, styrofoam, carbon fiber or glass fiber. Some may be very large, especially when looking for the planned full design flight properties.
Static model aircraft
Static models range from mass production to white metal or plastic to highly accurate and detailed manufacturing models and require a lot of work time. Many models are available in kit form, typically in injection molded polystyrene.
Flying model or dynamic model aircraft
This is also called an aircraft model because this aircraft model is similar to a full-size aircraft, while some are not like a real aircraft. Reduced size affects the model’s Reynolds number, which determines how the air reacts to the model, and the size of the required control surfaces relative to full-size aircraft can significantly change the stability and efficiency of each aircraft component.
These aircraft are now regulated by three methods
Free flight (F / F) aircraft fly from the ground without external control. The aircraft must be set up before the flight so that its control surfaces and weight allow for a stable flight. Most freely running models are not motorized gliders or rubber. This type is for personal flight.
The Control Line (C / L) model aircraft use cables to connect a plane to a central point, either manually or with a pole. Then the plane flies around the circles. Usually two cables are used, one is connected to the aircraft, one is controlled by the elevator.
Radio controlled aircraft are taxed and model models are transferred to the model, which controls the model’s air handling units in the same way as full-size aircraft. On conventional aircraft, the radio controlled the servos. However, modern aircraft often use flight control computers to stabilize the aircraft or even to fly the aircraft independently. This is especially true for quadcopters.
Learning to fly is not as easy as believable, but if you have mastered it, there are many lifestyles and very good games in many areas such as helicopters, size models, aerobic models, floating planes, gliders, etc.
Leave a Reply